Milestone XProtect Advanced VMS 2014 User Manual download pdf (Page 111)

Milestone XProtect

Advanced

VMS 2014

Administrator's Manual

www.milestonesys.com

111

Management Client elements

1. Select the patrolling profile in the Profile list.

2. Select the preset position for which you want to change the time:

3. Specify the time in the Wait time (sec.) field:

4. If required, repeat for other preset positions.

Customize transitions

By default, the time required for moving the camera from one preset position to another, known as

transition, is estimated to be three seconds. During this time, motion detection is by default disabled

on the camera, because irrelevant motion is otherwise likely to be detected while the camera moves

between the preset positions.

You can only customize speed for transitions if your camera supports PTZ scanning and is of the type

where preset positions are configured and stored on your system's server (type 1 PTZ camera).

Otherwise the Speed slider is grayed out.

You can customize the following:

 The estimated transition time

 The speed with which the camera moves during a transition

 Which plug-ins to disable during transition.

To customize transitions between the different preset positions:

1. Select the patrolling profile in the Profile list.

2. Select the Customize transitions check box:

Transition indications are added to the list of preset positions.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 296 297

No comments

Milestone XProtect Advanced VMS 2014 User Manual Page 111